Back to article
3339
Microphone picks up sound quietly or poorly
If the microphone on your product picks up your voice quietly or with added noise that makes it difficult for others to understand you during phone calls with your product, try the following:
Move to a less windy environment
Wind noise may enter the microphone capsule and render other audio unintelligible. Moving away from this area may allow for clear audio reproduction
Place another phone call.
Try placing another call—preferably to another number—to determine if the issue occurs all the time or only with certain people, which could result from poor reception with the phone service or device you call.
Check the cellular reception of your phone.
A weak connection to the cell service could cause poor audio quality while on a call. Try the call again when the reception improves.
Try disconnecting other nearby wireless devices that might interfere with Bluetooth signal.
Some wireless devices can cause interference with a Bluetooth signal.
Common examples include:
Common examples include:
- 2.4 GHz router
- cordless phone
- wireless speaker adapters
- home security motion sensors
- fluorescent lights
- microwaves
- wireless mice and keyboards
Remove and reseat the audio cable in the connected device.
On the connected device, disconnect the cable that connects your headset. Then, reconnect it to be sure it is fully connected and secure. (Tip: While connected, if you rotate the plug in the jack and hear crackling or intermittent sound, there might be debris or an issue with a contact inside the jack.)
Reboot the connected device.
Electronics might need to be reset from time-to-time—much like rebooting a computer. Power off the device, then power it back on and try again.
Try connecting a different Bluetooth® device.
If your Bose product can connect to another device, Bluetooth functionality is working. In cases like this, the issue could be with the first device or its settings.
Reset your product.
Much like rebooting a smartphone, your product might need to be reset on occasion to correct minor issues. For more info, see Resetting your product.
Check the condition of the headphone cable.
If the plug or any part of the cable for your headphones is damaged, you can replace the cable.
Check the condition of the headphone cable.
If the plug or any part of the cable is damaged, replace the headphone cable.
Your product may need service.
If the steps provided do not resolve your issue, your product may need service. Follow the link below for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.
Click here to start service
Click here to start service
Was this article helpful?
Thank you for your feedback!