Cleaning ear tips and mesh grilles

Cleaning the eartips

1. Remove the tips from the earbuds
2. Wash the eartips with mild soap
3. Rinse the eartips clean with water
4. Dry the eartips with a soft cloth
5. Before reattaching the eartips, leave them in the open for an extended period so any excess moisture can dry.

Cleaning the earbuds

1. Remove the eartips from the earbuds
2. Lightly wipe mesh screens on the openings of the earbuds with a soft dry cloth. Take care not to push earwax or debris into the openings.

1. Remove the tips from your earbuds
2. Put on protective gloves for your skin before you begin cleaning
3. Use a soft cloth or tissue to apply a small amount of hydrogen peroxide (3% concentration only) to the mesh surface at the opening of the earbud. Take care not to allow excess liquid to enter the opening
4. Let the hydrogen peroxide sit for 5 minutes so it can soften the wax
5. Wet a soft-bristled tooth brush with hydrogen peroxide (3% concentration only)
6. Gently scrub the mesh surface to loosen and remove the wax. Take care not to allow excess liquid to enter the opening of the earbud
7. Once clean, gently shake out any excess liquid and debris
8. Dry earbud with a soft cloth
9. Before reattaching the eartips, leave your earbuds in the open for an extended period so any excess moisture can dry.