Back to article
3348
Setting up your product
Learn how to set up your product, connect components and enjoy the benefits of all its features.
To connect the components of your system:
- Connect the speaker cables from the Speaker Connections jacks on the control console to the five speakers
Tip: The left and right speakers should be on your left and right as you face the TV - Connect a power cord from the Power jack on the system console to an AC (mains) outlet
- Connect a power cord from the Power jack on the Acoustimass bass module to an AC (mains) outlet
- Connect an HDMI cable from the TV jack on the system console to an available HDMI input on the TV.
Determine where to place your product.
For speaker placement suggestions, see Speaker placement and positioning.
Is the system being setup with or without the SoundTouch adapter?
The SoundTouch app must be installed on a device connected to the network to which the SoundTouch system will connect. For info on installing the app, see instructions for Installing the SoundTouch app on an Android device, Installing the SoundTouch app on an iOS device or Installing the SoundTouch app on a PC or Mac computer
Setup with SoundTouch
Setup without SoundTouch
Run ADAPTiQ to maximize the system sound.
For more information on how to run ADAPTiQ, see ADAPTiQ system setup and deactivation.
The ADAPTiQ audio calibration software, included with the system, automatically tests the acoustics of the listening area, analyzes speaker placement and tailors the sound of the system to the specific acoustics of the room.
The ADAPTiQ audio calibration software, included with the system, automatically tests the acoustics of the listening area, analyzes speaker placement and tailors the sound of the system to the specific acoustics of the room.
Connect audio devices to your product.
For more info, see Connecting other devices to your system.
Was this article helpful?
Thank you for your feedback!