Understanding LED indicator status lights and information

LED State		Description
Off		The adapter is unpowered, connected via Ethernet or the network is disabled
White (blinking fast)		The adapter is attempting to connect to a Wi-Fi network
White (slow flash)		The adapter is downloading a firmware update
White		The adapter is connected to a Wi-Fi network
White (solid 3 sec, double-flash, repeat)		The adapter is installing a firmware update
Amber (blinking)		The adapter failed to connect to Wi-Fi / network error
Amber (blinking fast)		The adapter has a firmware error
Amber (solid)		The adapter is in setup mode broadcasting its "Bose SoundTouch Wi-Fi Network"

Note: Adapters produced after DOM 4286 have a clear plastic lens in front of the indicator allowing the light from the LED to be seen more easily. Adapters produced before this DOM may require looking directly in to the hole to to see the LED.

The status light is located on the back of the bass module. It is below the barcode and above the Console and Service labels.
 

LED State		Description
Solid Amber		Connected to the console
Blinking Amber (every 3 seconds)		Acoustimass module is disconnected from the console
Slow Blinking Amber		Acoustimass module is available to make wireless connection to console
Fast Blinking Red		Bass module error
Solid Red		System error