Setting Image View

Before you begin

To set Image View:

1. The system console must be connected to the TV via HDMI
2. The system Widescreen TV setting must be Yes. For more info, see Using the Widescreen TV setting
3. If the system Video resolution setting is Fixed, the connected device needs to send a resolution of 720p or greater. For more info, see Setting video resolution

Note: Each HDMI video source can have a separate Image View setting.

Setting Image View from the remote control

On the remote control, press the Image View button repeatedly to scroll though the available settings.

Setting Image View from the system menu

In the steps below, the system menu can be viewed on your TV screen and/or on the system display panel.

1. On the remote control, press the Settings button
   Tip: If the system menu does not appear on your TV, be sure the correct TV input is selected
2. Scroll down to select Image View (or VIEW on the system display)
3. Scroll right to select the options
4. Scroll up or down to select a setting
5. Press the Exit button to exit the menu.

Image View options

Normal: Image is unchanged.



Zoom: Image size is increased horizontally and vertically to fit the screen.



Stretch: Image is stretched evenly from the center.



Stretch 2: Image is stretched at the edges but the center is unchanged. (Note: This option is available on systems with software 02.02.00 or newer.)



Gray bars: Vertical gray bars are added to the left and right sides of the normal image.