Back to article
3348
Reconnecting a Bluetooth device that you have already connected
Your product remembers the last several Bluetooth devices it was paired to so that it can quickly and automatically reconnect to them. This is useful if your product connects to a different device when you turn it on, or if you just want to switch to a different device.
Select a Bluetooth® device that you previously connected.
To select a device from your product memory, voice prompts must be on. If you turned them off, see Enabling or disabling voice prompts for help turning them on again. When connecting a Bluetooth® device as described below, you can only connect to one device at a time.
- WIth your headphones powered on, push the Power switch all the way right, then release it to hear which device is selected.
- Within 2 seconds, push the Power switch right again and release it to select to the next device in memory.
- Repeat step 2 until you hear the name of the device you want to connect.
If you are unable to connect a Bluetooth device
See troubleshooting for Cannot connect a Bluetooth device.
Was this article helpful?
Thank you for your feedback!