Using multiple Bluetooth® connections

Ensure your earbuds are up to date with the latest firmware. See Updating the software or firmware of your product

To enable Multipoint, in the Bose App go to Settings > Bluetooth Connections then tap the Multi-Point Connection toggle switch - moving it to the right.

For units manufactured after July 2024, Multipoint is enabled by default.

To identify the connected device, press-and-hold the button on the earbud with the Switch Devices Shortcut. Release the button when the desired device name is announced.

To switch between connected devices:

1. Stop audio playback on the device currently playing.
2. Begin audio playback on the other device.

The earbuds can receive a phone call from either connected device, regardless of which device is playing audio.

If you find that notifications from your secondary device interrupt your listening experience on your primary device, you can turn off Multi-point.

In the Bose app, go to Settings>Bluetooth Connections and toggle Multi-point connection to 'off'. This will disconnect your secondary device.


Note: You will only be able to connect to one device at a time. If you want to connect to two devices simultaneously, toggle Multi-point connection back to 'on'

To reconnect to a different device using the earbuds, you must set a shortcut to Switch Devices - see Customizing the touch control shortcut. 

1. Press and hold the button on the earbud assigned to switch devices.
   A voice prompt will first announce the name of the currently-connected device, followed by the names of the other devices in the previously paired to the earbuds
2. When you hear the name of the device you'd like to connect to, release the button.
   You will hear a tone that indicates when the device is connected.

You can also reconnect to a different device using the Bose app or by selecting the earbuds in the Bluetooth menu of the device you like to change to.