Using your remote

Find out how to access the different features of your speaker using the buttons on the included remote control:

• Press to power your speaker on or off.
• Press and hold (for about five seconds) to enable or disable auto-wake, which lets your speaker automatically power on when sound is received via the Optical or aux-in connections. When enabled, an up-tone is heard; when disabled, a down-tone is heard

Press or hold + or – to increase or decrease the volume level

Press to mute or unmute sound

Press to control your TV with the Power, Volume or Mute buttons

• Press to control a connected Bluetooth® device with the Volume or Mute buttons.
• Press and hold (for about one second) to allow Bluetooth devices to connect to your speaker.
• Press and hold (for about 10 seconds) to clear the memory of previously connected Bluetooth devices. When cleared, a tone is heard

• To adjust the amount of bass, press BASS, then use the + or – buttons to increase or decrease the bass. When finished, press BASS again.
• To select the default bass setting, press and hold BASS until the speaker lights blink

• Press to enable Dialogue mode for the current source. When enabled, the source light on the speaker glows green.
• If your speaker is mounted to a wall, press and hold for five seconds to enable Wall EQ. When enabled, an up-tone is heard; when disabled, a down-tone is heard